S LIMITED 568/563 Bearings

R - Cone Backface To Clear Radius1:0.14 in; B - Cone Width:1.1965 in; Series:3300; a - Effective Center Location3:-0.43 in; db - Cone Backface Backing Diameter:2.13 in; Bearing Weight:2.1 lb; Aa - Cage-Cone Backface Clearance:0.06 in; G1 - Heat Generation Factor (Roller-Raceway)10:34.6; d:1.6250 in;

i:15 mm; T:10 mm; Thread D11:Tr260x4; Tapped Hole Threads:M8x1.25; Weight:5.67 Kg; D4:290 mm; Dp:273 mm; Bn:34 mm; s:20 mm; D3:310 mm;

Eng Internal Radial Clearance - Max:0.0037; Locking Style:Single V-Lock; Dimension J (Bolt Size):0.625 in; Grease Lubrication - M/N Seal:1800 rpm; C0 - Static Load:48600 lb; Dimension D Max:9.20 in; Dimension C:3.62 in; Housing Style:Two-Bolt Pillow Bloc; Shaft Size Type:Imperial; Grease Lubrication

G2 - Heat Generation Factor (Rib-Roller End):59.4; Cg - Geometry Factor:0.132; C1 - Dynamic Radial Rating (Two-Row, 1 million revolutions)1:246000 lbf; C90(2) - Dynamic Radial Rating (Two-Row, 90 million revolutions)2:63800 lbf; K - Factor8:1.58; Cone Part Number:95512X; G1 - Heat Generation Factor

Weight:625.000 kg; Fillet Radius/Chamfer:7.5 mm; Groove Width A:45 mm; da (min):516 mm; Enclosure:Open; Center Guidance:Fixed Inner Ring Rib; Axial Load Factor Y1:1.71; ra (max):6 mm; Limiting Speed - Oil:570 rpm; Static Load Rating:14,800,000 N;

C0 - Static Radial Rating:85800 N; Ball Type:STEEL; Bearing Weight:1.817 Kg; Design Units:METRIC; da - Inner Ring Backing Diameter:96.700 mm; Contact Angle:25 º; Full Timken Part Number:3MM217WICRDUH; do - Ball Diameter:20.63750 mm; Limiting Speed (Oil):17000 rpm; r - Outer Ring To Clear Radius3:2.0

r - Cup Backface To Clear Radius2:6.35 mm; Series:217000; Aa - Cage-Cone Backface Clearance:7.9 mm; G1 - Heat Generation Factor (Roller-Raceway):516.7; Bearing Weight:19.40 Kg; e - ISO Factor8:0.4; B:76.203 mm; Ab - Cage-Cone Frontface Clearance:4.3 mm; Cage Type:Stamped Steel; Cg - Geometry Factor:

B - Cone Width:1.1542 in; D:4.25 in; C - Double Cup Width:2.125 in; r - Cup Frontface To Clear Radius2:0.03 in; Ca90 - Dynamic Thrust Rating (90 million revolutions)6:4540 lbf; C90 - Dynamic Radial Rating (One-Row, 90 million revolutions)3:7900 lbf; d:2.2500 in; Cg - Geometry Factor11:0.0946; Series

C - Cup Width:19.050 mm; G1 - Heat Generation Factor (Roller-Raceway):28.7; Cage Type:Stamped Steel; db - Cone Backface Backing Diameter:40.89 mm; Y - ISO Factor9:1.98; D:76.2 mm; C90 - Dynamic Radial Rating (90 million revolutions)4:5060 lbf; Cg - Geometry Factor:0.0725; Bearing Weight:0.6 Kg; Ab -

Cone Part Number:X32244M; Y - ISO Factor9:1.38; Aa - Cage-Cone Backface Clearance:9.9 mm; Ab - Cage-Cone Frontface Clearance:8.4 mm; Da - Cup Frontface Backing Diameter:379.5 mm; R - Cone Backface To Clear Radius1:5 mm; Bearing Weight:59.41 Kg; D:400 mm; C0 - Static Radial Rating:3010000 N; r - Cup

Dimension A:3.75 in; Pre Install Clearance Max:0.0039 in; C - Dynamic Load (Basic):79700 lb; Dimension C:5.13 in; Dimension G:3.7500 in; Dimension RAA:0.84 in; Dimension L:4.47 in; e - Geometry Factor:0.23; Dimension D Max:10.88 in; Oil Lubrication - M/N Seal:1400 rpm;

Note:This product line wa; Dimension Y:2.0 in; Bearing - Housing - Seal:LSE111BXHGKPS; Maximum Speed:4630 rpm; Dimension X (Thread):1 - 8 UNC; Shaft Size:1-11/16 in; Series Type:Light Series; Cor - Static Load Rating:19558 lbf; Dimension G:4.6 in; Dimension L:4.3 in;

Static Load Rating:15,000 N; Bore Type:Cylindrical Bore; B:19 mm; Configuration:Single Row; Radial Clearance:0.013 to 0.028 mm; Fillet Radius/Chamfer:1.1 mm; Cy (max):4.6 mm; Dynamic Load Rating:26,700 N; da (min):37 mm; Groove Diameter:68.8 mm;

Dimension A:11.7 in; Dimension R:2.1 in; Ca - Axial Load Rating:10206 lbf; Dimension W:2.0 in; Bearing Type:Split Cylindrical Re; Tensioning Unit Type:Tension Type; Dimension H:2.4 in; Series Type:Medium Series; Support Type:Take-Up; Dimension S:3.6 in;

Db (min):347 mm; Db (max):331 mm; Limiting Speed - Oil:2,100 rpm; r1:3 mm; Bore Type:Cylindrical Bore; Static Load Rating:820,000 N; d:240 mm; dc (min):275 mm; Configuration:Single Row; ra1 (max):2.5 mm;